VEGAFLEX 81 — Configuration
Scope (A): Europe
Approval (C): ATEX II 1G, II 1/2G, II 2G Ex ia IIC T6...T1 Ga, Ga/Gb, Gb
Version / Material (S): Exchangeable rod (ø8mm) / Alloy C22 (2.4602)
Probe: mounted
Length (from seal surface): 0 mm (range 300…6000 mm — needs to be filled in)
Process fitting / Material (BV): Flange NPS 3" Class 300 RF, ASME B16.5 / 316/316L, Alloy C22 (2.4602) plated
Seal / Second line of defense / Process temperature (L): FFKM (Kalrez 6375) / with -20…+200°C
Electronics (H): Two-wire 4…20 mA/HART
Supplementary electronics (X): without
Overvoltage protection of the supply cable: without
Housing / Protection (A): Aluminium single chamber / IP66/IP68 (0.2bar)
Cable entry / Connection (D): M20x1.5 / Blind plug
Display/Adjustment module PLICSCOM (A): mounted
Certificates (X): No
Operating instructions (DE): German
Number of operating instructions: 0 (range 0…1000)
Type label / Measurement loop identification label: of foil / without
Customer-specific adjustment: No
Linearization: No
Address setting: No
Application-specific settings: without
Min. process pressure: -1 bar
Max. process pressure: 40 bar
Customs tariff number (HS code): 90261029
Software version: Current version
⚠️ Note: "Length (from seal surface)" is currently set to 0, but the valid range is 300–6000 mm — this field likely needs to be completed before the configuration is valid.
Brand: VEGA
Dimension(CM): 10.0 x 10.0 x 20.0 (housing typical; probe length variable per config, not fixed in P/N; rounded up)
Weight(Kg): 1.0 (typical sensor mass ~0.5-2+ kg depending on probe; volumetric often higher for shipping; bigger value used, rounded up)
HS-CODE: 902610 (or 903180/903289 for level measuring instruments/sensors; common for VEGA radar/level sensors)
Discontinued: No
